The subnet mask 255.255.255.0 address is the most common subnet mask used on computers connected to Internet Protocol (IPv4) networks. Besides its use on home network routers, you might also encounter this mask on network professional certification exams such as the CCNA.

255.255.255.0 and Subnetting

Subnets act as virtual fences, splitting a block of IP addresses into smaller units. This practice relieves network congestion and allows for granular access across subnets. A subnet mask identifies individual subnets.

Traditional subnets worked with classful networks that partitioned the IP addresses into one of five classes (Class A/B/C/D/E) according to the value of the IP address number.

The subnet mask 255.255.255.0 converts to a 32-bit binary value:

  • 11111111 11111111 11111111 00000000

The 0 digits of this mask span the IP range of the subnet—8 bits or up to 256 addresses in this case. A larger number of smaller-sized subnetworks can also be defined by modifying the mask as shown in the table below.

An incorrectly configured subnet mask (also called netmask) could be the reason why you can’t connect to the internet.

Subnets and CIDR

In the traditional classful scheme, many unused IP addresses were wasted because internet service providers and large corporations reserved address blocks that could not be shared. Much of the internet subsequently converted to classless IP networking to support flexible allocation policies and cope with the surge in demand for IPv4 internet addresses in the 1990s.

Classless networks convert the traditional subnet representation to a shorthand notation based on the number of 1 digits in the mask. Classless Inter-Domain Routing (CIDR) shorthand writes an IP address and its associated network mask in the form:

  • xxx.xxx.xxx.xxx/n

Here, n represents a number between 1 and 31 that is the number of 1 bits in the mask. 

CIDR supports classless IP addressing and associates network masks with IP network numbers independent of their traditional class. Routers that support CIDR recognize these networks as individual routes, even though they may represent an aggregation of several traditional subnets.

Network Classes

The InterNIC organization administers internet domain names and divides IP addresses into classes. The most common of these are classes A, B, and C. Class C networks use a default subnet mask of 255.255.255.0.

Using 255.255.255.0 as an IP Address

Although expressed in the form of an IP address number, network devices use 255.255.255.0 as a mask and not as a working IP address. Attempting to use this number (or any IP number that starts with 255) as a device address causes the IP network connection to fail due to the definition of number ranges on IP networks.

Get the Latest Tech News Delivered Every Day

  • How to Find the IP Address on a Mac

  • CIDR: Classless Inter-Domain Routing

  • HWiNFO v7.36 Review

  • “Failed to Obtain IP Address”: How to Fix an IP Configuration Failure on Android

  • IP Tutorial: Subnet Mask and Subnetting

  • How to Set Up and Use Wake-on-LAN

  • What Is an IP Address?

  • What Is the 127.0.0.1 IP Address?

  • How To Create a Soft Fade Vignette Effect

  • What Is Hexadecimal?

  • What Happened to IPv5?

  • 4 Ways to Find Your Roku IP Address (With or Without the Remote)

  • What Is a Dynamic IP Address?

  • How to Use an IP Address to Find a MAC Address

  • How to Find the Default IP Address of a Belkin Router

  • How to Change the IP Address on Your iPhone

  • Facebook

  • Twitter

Hit Refresh on Your Tech News

  • About Us

  • Privacy Policy

  • Editorial Guidelines

  • Terms of Use

  • Careers

  • Advertise

  • Contact

  • EU Privacy

  • NEWS

  • HOW TO

  • FEATURES

  • ABOUT US